TL7

Collect

Specification
Engine type	CG150cc-175cc JINGBA/200cc JINQIN, four stroke, water-cooled
Cylinder Arrangement	Single Cylinder
Bore×Stroke (mm)	62*49.5
Piston Displacement (cc)	150/175
Lubrication Method	Pressure and splash
Compression Ratio	11：1（150CC); 10.5:1(175CC); 10.5:1(200CC)
Maximum Power(kw/r/min)	8.8/8500;
Maximum Torque(N.m./rpm)	14.2/6000
Transmission System	shaft drive with reverse gear
Ignition Type	CDI
Starter System	electric & kick start
Transmission	Forward cycle 5 gears ( 1-0-2-3-4-5) + Reverse gear
Minimum Fuel Consumption(g/Kw.h)	≤354
Net weight(kg)	435
Clutch method	Manual wet multi-plate
L×W×H (mm)	318511701390
wheel base (mm)	2200；2130；2105
Brake (Front/Rear)	front & rear drum brake
Wheel	Aluminum wheel
Tyre, Front	3.75-12
Tyre, Rear	4.00-12
Rear Carriage	1600mm x 1100mX300MM
Front suspension	Single 37 outer spring
Rear suspension	Single ply/P6/L500/W45/H82/T6/No Slot
Rear Axle	Semi-floating weighted 180 drum/L974/31:9
Fuel tank	14.2L
Battery	12V28A
Max. Loading Capacity (Kg)	500
Max. Speed	60 km/h